OUR SERVICES
Oven installation services
When we deliver your new home appliance, our delivery Partners can install it too, and remove your existing appliance for recycling, or re-use the item where possible, at the same time.
Simply add both the Installation and Recycling Service options to your basket alongside your new home appliance.
Find our home appliance installation service full terms and conditions here
What to check?
Below, we explain what you need to check and what to do if your current setup isn’t suitable for the appliance you’d like to buy. To ensure a successful installation, it is vital that you review these sections before booking
Power
Fuel Type
If you’re planning to switch fuel type – from gas to electricity, or want to have a gas or dual fuel appliance installed, you’ll need to speak to a Gas Safe registered engineer as currently, we do not offer this service. Our engineers can help with electrical appliances, but you must have the correct supply already in place, and within one metre of where you want the new oven to go.
What to do if your setup is unsuitable
If you don’t have a gas supply then you’ll need to choose an electric oven instead.
If you have no electricity supply, including if the supply is over 1 metre away from your desired oven location, speak with a competent person about the work required.
Amperage
If you’ve chosen an electric oven, make sure you have sufficient power for it. For a traditional plug outlet, your new oven must have a power rating of no more than 13 amps – look for the amperage on our product specifications. If you have an oven switch, you can opt for a more powerful, higher rated appliance.
What to do if your setup is unsuitable
If you’re not sure of your current setup, try looking at your fuse box. This should tell you the amp rating of your oven circuit, which you can then compare with the amperage of your chosen appliance.
Speak to a competent person if you have any concerns or questions about your power supply.
Space
Measurements
Please check the dimensions of your chosen oven to ensure it will fit your existing space.
You’ll find all the information you need in the product specifications on our website.
What to do if your setup is unsuitable
We are unable to complete any adjustments to your kitchen on the day. Speak to a competent person before booking an installation about the work required.
Oven Type
Make sure to check which type of oven you require and where it can be installed.
A single oven can be fitted either into a tall kitchen unit or under a worktop.
A built-under double oven will fit beneath a worktop.
And a built-in double oven will fit into a tall kitchen unit.
What to do if your setup is unsuitable
If you’re not replacing your oven like for like, you may need some carpentry work carried out by a competent person before booking an installation service.
Installation and recycling prices
Installation Price
Integrated 13 or 32 Amp Oven: £110
Integrated 16 or 20 Amp Oven: £130
As part of this Service, we'll install a miniature circuit breaker between the cooker switch or connection point and the oven’s cable supply. If there is a 16 or 20 amp circuit already in the property, we'll refund the difference between the two electric oven services, post-installation.
Recycling
Per appliance: £25
If you have only booked a recycling service, please disconnect your current appliance has been safely disconnected from the electricity supply. For gas appliances, please seek qualified help to do this. Read about our guide to recycling electrical and electronic products
Find out more about our home appliance installations here
If your appliance is being delivered directly from the supplier and you would like them to complete an installation service, please call 0345 604 8835 to book once you have purchased the appliance.
FInd out more about our home appliance installations here